Compensator, DN250-PN10 (DIN/EN), NBR

Version:
Flat corrugated, compression-moulded rubber bellows, highly elastic with synthetic fibre pressure carrier (high-temperature version: steel cord) and wire-reinforced rubber flange collar (self-sealing), swivelling steel flanges on both sides

Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)

Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), flange: RSt 37.2 galvanised zinc plated

Temperature range:
Max. +90°C (high temperature version: max. +110°C), from +60°C reduced operating pressures

Operating pressure (standard):
up to +60°C: 16 bar, +80°C: 11 bar,+90°C: 6 bar, bursting pressure: 48 bar (For intermittent loading, the max. operating pressure should be set by 30% lower)

Operating pressure (high temperature version):
up to +60°C: 16 bar, +80°C: 14 bar,+90°C: 12 bar,+100°C: 10 bar,+110°C: 6 bar, bursting pressure: 48 bar (For intermittent loading, the max. operating pressure should be set by 30% lower)

Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!

Optional:
EPDM bellows, high-temperature version (+110°C)-HT, NBR bellows, oil-resistant -B, NBR bellows, oil-resistant, high-temperature version (+110°C)-BHT, butyl bellows (CIIR), for use with drinking water in accordance with KTW recommendation -LE

Flange connection	DN250-PN10 (DIN/EN)
Bellows version	NBR
DN [mm]	250
Operating pressure [bar]	0 - 10
Axial compression [mm]	45
Axial stretching [mm]	15
Lateral offset [mm]	15
Angular deviation [°]	7
L [mm]	175
B [mm]	25
D [mm]	395
Di (± 3) [mm]	252

{{ $t('shop.all.gewicht') }}	24 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	40169991
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}