DHDS-16-A-NC (1259492) three-point gripper

Item number:

OT-FESTO034000

pcs
Properties
size 16
Stroke per gripper jaw [mm] 2,5
Max. exchange precision [mm] <= 0,2 mm
Max. gripper jaw play ax, ay [deg] <= 0,5 deg
Max. gripper jaw play Sz [mm] <= 0,02 mm
Rotational symmetry [mm] <= 0,2 mm
Repeatability grippers [mm] <= 0,04 mm
Quantity Gripper jaws 3
installation position arbitrary
Principle of operation double acting
Gripper function 3 point
Construction set up lever,
Force controlled movement cycle
Position detection For Hall sensors
Operating pressure [bar] 4 to 8
Max. working frequency gripper [Hz] <= 4 Hz
Min. opening time a 6 bar [ms] 31
Min. closing time at 6 bar [ms] 34
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium Oiled operation possible (required in further operations)
Corrosion resistant class KBK 1 - low corrosion stress
ambient temperature [°C] 5 to 60
Mass inertia [kg/cm²] 0,139
Max. force on gripper jaws Fz static [N] 50
Max. torque on gripper jaws Mx static [Nm] 2
Max. torque on gripper jaws My static [Nm] 2
Max. torque on gripper jaws Mz static [Nm] 2
Lubrication interval guide elements [Mio SP] 10
Max. mass per external griper finger [g] 50
Product weight [g] 99
Fastening type With Female thread and dowel pin
Pneumatic connection M3
Material information RoHs compliant
Cover cap material PA
Housing material Aluminium wrought alloy,
Hard anodised
Gripper jaws material High-alloyed stainless steels
Gripping force safety When closing
Further information on OT-FESTO034000
Weight 99 g / pcs
Customs duty number 84798997
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available